j9真人(中国)第一游戏·官方网站

锂硼合金

Lithium-Silicon Alloy


产品介绍 Product introduction

锂硼合金为多孔隙结构的脆性Li7B6基体相和韧性Li填充相组成的一种复合材料，密度0.88±0.04g/cm3，外观为银白色金属，极不稳定，遇空气易变质，遇水反应剧烈。锂硼合金主要应用于锂系热电池负极材料，具有高比能量、高比功率和低极化、电化学电位与纯锂相近，600℃以上仍为固态等突出优点，是新型锂系热电池的极佳负极材料。与目前广泛使用的锂硅合金相比，锂硼合金作为负极材料所装配的单元电池在最高电压和放电工作时间这两方面具有更好的性能。

Lithium boron alloy is a kind of composite material composed of Li7B6 matrix phase with porous structure and Li toughness filling phase, with a density of 0.88±0.04g/cm3. It has a silver-white metal appearance and is extremely unstable. It is easy to deteriorate when exposed to air and react violently when exposed to water. Lithium boron alloy has advantages of high specific energy, high specific power, low polarization and high melting point, what's more, its electrochemical potential is similar with that of pure lithium, which makes the lithium boron alloy become excellent anode material for the new thermal battery. Compared with the lithium silicon alloy which is widely used in thermal battery at present, the lithium boron alloy as the anode material of thermal battery has better performances in the highest voltage and discharging time.


表面质量Surface quality

产品表面光亮、平整、无氧化和油斑，为银灰色质软金属带材。

The product is a soft silver-gray metal chip or strip, the surface of the product is bright and smooth without oxidation and oil spots.

化学成分 Chemical composition

牌号
Category		锂含量（wt%）
Mass fraction of lithium		镁含量（wt%）
Mass fraction of magnesium		硼含量（wt%）
Mass fraction of boron
Li5555±2≤4余量
the residue
Li6060±2≤4余量
the residue
Li6565±2≤4余量
the residue


尺寸规格Dimensions

宽度（mm）
Width range 		厚度（mm）
Thickness range 		宽度允许偏差（mm）
Allowable deviation of width 		厚度允许偏差（mm）
Allowable deviation of thickness
60~1000.4~1.8±0.2±0.015
备注：产品尺寸规格可依据客户商定要求确定。
Remark: The dimensions of products can be determined according to customers' requirements.

 


热稳定性 Thermal stability

产品在600℃条件下保持稳定固体形态，无锂渗漏。

The product is stable without liquid lithium outflowing at 600℃.

包装、贮存 Packaging and storage

包装采用开顶金属圆罐或采用铝塑复合袋充干燥氩气密封。本品应密闭隔绝空气保存，注意防潮、防水，远离热源、火源及氧化性物质。

The product is packaged with open-top round metal cans or aluminum-plastic composite bag filled with dry argon sealed. The product should be sealed off from air, moisture, water, heat sources, source of ignition and oxidizing substances.

在线咨询